Bun venit la IngeniumSHOP!

romana english

Cabinet (rack) de pardoseală SRS Standard, 19''

    Cod : SRS-STD
    Ţara de origine: Polonia
    Timp de livrare: 14 zile
Preţ de la: 352,80 €

Fiţi primul care scrie o recenzie acestui produs

Scurtă descriere

One of the major product groups of is the range of IT telecom metal cabinets with accessories. The featured cabinets are used for holding active and passive network equipment in 10”, 19”and 21”standard indoor applications.  The simple construction and very high standard of product finish make the product highly functional. The wide range of cabinets and accessories allow custom configuration. The indoor cabinets offered are IP20 and can be upgraded to IP41 according to PN/E 08 106/EN 60529.





Cabinet (rack) de pardoseală SRS Standard, 19''

Mai multe imagini

  • 19" Floor Standing Cabinet SRS Standard - front view

* Câmpuri obligatorii

Preţ de la: 352,80 €



  • Sheet steel housing with welded frame, completely pre-assembled, self ventilated.
  • Surface finish: powder painted in RAL 7035 - light grey (other colors on request).
  • Protection IP20 in accordance with PN 92/E-08106/EN 60529/IEC 529. (does not apply to brush cable entries)
  • Indoor use.
  • Cabinets can be arranged in line using line-up bolts after removing side walls (Part No.11190130).
  • Cabinet frame fully welded - 1,5 mm thick sheet steel on 4 x leveling feet M10. Optionally:
    • plinth standard or with tilt protection
    • cabinet wheel kit - 11090015 (maximum load capacity 150 kg.)
    • heavy duty castor set - (maximum load capacity 500 kg.)
  • Front door: window made of safety glass (optionally: full steel, full glass, punched perforated plate), opening angle 180 degrees. Left or right door opening options.
  • Cabinet rear panel - 1 mm. thick sheet steel, removable with two single point locks (Optionally: full steel or perforated, left or right side mounted door).
  • Cabinet side panels - 1 mm thick sheet steel, removable with two single point locks.
  • Two pairs of the profile rails (AL-Zn coated) each arranged at the front and rear on the inside. Each profile with unit labeling. Maximum spacing between front and rear profile rails:
    • cabinet depth 600 mm - max 472 mm
    • cabinet depth 800 mm - max 672 mm
    • cabinet depth 900 mm - max 772 mm
  • Possibility to increase maximum weight of equipment mounted in the cabinet SRS by using cabinet max load strengthen kit
  • Cables let in entry optionally either from roof or base, either, through top or bottom of the rear side of cabinet, pre-punched opening. (Dimensions: 450 x 90 mm).
  • In the roof and base of cabinet 2 x 4U blind plates (pre - punched opening)  for fan units (possible configurations 1 or 2 x 2 fan units, 1 x 4 fan units, 1 x 6 fan units).
  • Wide range of supplementary accessories: plinths, shelves, fan units, light units, power distribution units, blanking covers, cable management accessories etc.
  • Optional 19" swing frame 90 opening.


Informaţii adiţionale

Nume Cabinet (rack) de pardoseală SRS Standard, 19''
Ţara de origine Polonia
UM buc